Harrington Hoists and Cranes Series 3 End Truck User Manual
End trucks top running & underhung series 3
Advertising
END
TRUCKS
Top
Running &
Underhung
SERIES 3
1 Ton through 10 Ton Capacity
Model and Serial Number
EFFECTIVE: March 18, 2014
This equipment should not be installed, operated, or maintained by
any person who has not read and understood all the contents of this
manual. Failure to read and comply with the contents of this manual
can result in serious bodily injury or death, and/or property damage.
Advertising
Table of contents
Document Outline
- Table of Contents
- 1.0 Important Information and Warnings………………………………………………………………………….5
- 2.0 Technical Information…………………………………………………………………………………………..8
- 3.0 Assembly, Installation and Test Trial Operation…………………………………………………………….24
- 4.0 Operation………………………………………………………………………………………………………36
- 5.0 Inspection……………………………………………………………………………………………………...37
- 6.0 Lubrication…………………………………………………………………………………………………….. 44
- 7.0 Maintenance & Handling……………………………………………………………………………………...45
- 8.0 Troubleshooting……………………………………………………………………………………………….49
- 9.0 Warranty……………………………………………………………………………………………………….52
- 10.0 Parts List……………………………………………………………………………………………………….54
- 1.0 Important Information and Warnings
- 2.0 Technical Information
- This Page Intentionally Left Blank
- 3.0 Assembly, Installation and Trial Operation
- 4.0 Operation
- 5.0 Inspection
- 6.0 Lubrication
- 7.0 Maintenance and Handling
- Figure 7-1 Structural drawing of gear motor
- 8.0 Troubleshooting
- 9.0 Warranty
- N6 Parts List Rev16-English.pdf
- 10.0 Replacement Parts Guide
- Figure 9-1 End Truck Nameplate
- Applicable End Truck Models - UP-3-0135 to 0535
- Applicable End Truck Models - UMX-3-0235 to 0550 & UG-3-0235 to 0550
- Applicable End Truck Models - TP-3-0135 to 0535
- Applicable End Truck Models - TMX-0135 TO 0560 & TG-0135 TO 0550
- Applicable End Truck Models - TMX-1035 to 1060
- Hand Wheel and Drive Shaft Assembly Parts List
- Name
- Drawing Number
- Kit B
- Applicable End Truck Gear Motor Models - G1J025 & G1J040
- Applicable End Truck Gear Motor Model - G1J075 & G1J150
- Applicable End Truck Models: UG-3-03xx, TG-3-01xx, & TG-3-0535
- Drawing/
- Notes
- Name
- Applicable End Truck Models: UG-3-05xx & TG-3-0550
- Drawing/
- Notes
- Name