Harrington Hoists and Cranes RH - Advantage Wire Rope Hoist - Manual (Page 42)

42
9) Remove the Dust Cover (K) by unscrewing the Dust Cover Screws (J) (see Figure 6-13 ). Note: Dust
cover is an option and may not be present.
10) Gain access to the Rope Guide and associated components. Remove the Limit Switch Assembly (C1)
removing the Screws (D1). Do not disconnect or change the setting of the Limit Switches (see Figure
6-14 ).
11) Remove the Screws ® and the Limit Switch Actuators (N) from the Rope Guide Ring Halves (P) and
(Q) (see Figure 6-15 ).
Figure 6-13
Figure 6-14 Figure 6-15