Harwin Z20-320 - Manual (Page 4)

IS-15 Issue: 5 Date: 05.10.2011 C/Note: 11479 Page 4 of 4
5
-320
20-118
Hex socket grub screw
Wheel adjustment screw
3. Re-fit the Hex socket grub screw and tighten.
4. Check the operating force as shown at the top of the page. Repeat the procedure if the force
is incorrect.
If the adjuster is set to maximum, and operating force is still not achieved, the
tool has finished its working life (50,000 crimps minimum), and will need
replacing.