IAI America RCD-RA1D - Manual (Page 21)

5. T
ransportation
15
5.2 Handling in Assembled Condition
� When carrying the actuator, exercise caution not to bump it against nearby objects or structures.
� Secure the rods to prevent sudden movement during transport.
� If any end of the actuator is overhanging, secure it properly to avoid significant movement due to external
vibration.
� If the actuator assembly is transported without the ends being secured, do not apply an impact of 0.3G or more.
� When suspending the mechanical equipment (system) with ropes, avoid applying force to actuator, connector
box, etc. Also, avoid the cables being pinched or caused an excessive deformation.