Adding key macros – IntelliTrack Check In/Out User Manual
Page 33
Chapter 2
Device Setup
23
2.
If VT Line Mode is turned off, you must turn it on. To turn on VT Line
Mode, select VT Line Mode in the navigation tree view (left pane of
the form) and then right-click. A right-click menu appears.
3.
Select Edit from the right-click menu. A VT Line Mode dialog
appears.
4.
Click the drop down arrow underneath the Use VT Line Mode? field
and select On from the choices that appear.
5.
Click OK to close the VT Line Mode dialog box. The VT Line Mode
setting should now be On.
6.
Click File > Save from the menu bar to save this setting.
Adding Key Macros
You need to map the F5 key and the ESC key. To map these keys, continue
working at the termcfg.bin-CFGMgr screen:
1.
From the termcfg.bin-CFGMgr screen, click the plus sign next to the
Emulation folder in the navigation tree found in the left pane of the
screen. The contents of this folder display. Next, click the plus sign
next to the Common folder. The contents of this folder display. Next,
click the Key Macros selection to display the Key Macros settings.
Navigation
Tree