Inter-M ARM-911 - Manual (Page 7)

AUTOMATED REMOTE MESSAGE
4 ARM-911
Front Panel Front Panel
1. SD CARD COVER
2GB SD Card is installed.
Be sure the direction when insert a SD card into the slot.
Only 2GB memory can be used.
2. INDICATING LED
The LED is lit when the button is pressed.
3. COPY BUTTON
Use this button to copy the front SD card to the backup SD card which is inside the unit.
The backup SD card is 2GB. When press the COPY button, the window displays ‘PRESS THE MODE KEY
ONCE MORE’. Press the Display mode button to start COPY. If the Display mode button is not pressed within
about 3 seconds, then the COPY function is cancelled.
During copy the SD card, no other functions can be used.
NOTE: Do not turn off the power during copying the memory disc.
4. INSTANT PLAY BUTTONS
Use this button to play the file in the SD card directly.
5. DISPLAY WINDOW
The display shows the current status of the unit.
6. DISPLAY MODE BUTTON
Use this button to change the display mode.
1 2 5 6
3 4