Inter-M PX-8000 - Manual (Page 7)

8X8 AUDIO MATRIX SYSTEM
5 PX-8000
PX-8000 Front Panel PX-8000 Front Panel
1. MONITOR SPEAKER
Built-in 1-Watt Power Amplifier and 8 Ω Monitor Speaker to monitor input channel selected out of 8 BGM
sources.
2. BGM INPUT SELECTION BUTTON
Button to select one out of 8 BGM sources.
3. BGM INPUT DISPLAY
Displays selected BGM source.
4. VOLUME TO ADJUST BGM OUTPUT LEVEL FADER
A volume to adjust Main BGM broadcast to the relevant output and the output sound volume of LM-8000. The
output volume of a Paging MIC and a remote MIC volume are not adjusted by this volume.
5. TALK BUTTON
You can start broadcasting if selecting the desired area and pressing the TALK button when performing
Paging MIC broadcasting. In this case, character "P" is displayed on the BGM input channel display window
equivalent to the selected area. This is a toggle switch and thus you can terminate broadcasting if pressing it,
and the selected zone is released.
6. ESC BUTTON
Used when changing all BGM or cancel recording of the built-in recording.
7. BGM ALL / ENTER BUTTON
Used for broadcasting same BGM to all the output area. If pressing the BGM ALL button, "ALL 1" is
displayed and BGM numbers increase whenever pressing it again. If a BGM to change is determined, select
BGM by pressing the ENTER button.
BGM broadcasting to the output area is also changed simultaneously that the BGM number is changed
when pressing the ENTER button. Press the ESC button to change all BGM or return the original status.
(Applied even to system link)
1
12 14 15 16 17 18 13
2 3 4 7 8 9 10 11 5 6