Inter-M CD-6208 - Manual (Page 12)

MULTI SOURCE PLAYER
10 CD-6208
Operating Method Operating Method
1. PLAYBACK
(1) Push the power switch to turn the power on.
The display will indicate NO DISC.
(2) Insert a disc into the slot, label side upwards.
DO not forces the disc into the slot, the unit will pulls the disc when the CD is partially inserted.
※DO NOT INSERT a CD of 8 cm size into the slot.
1) CD function
- Playback disc is a ordinary audio CD, CD-R or CD-RW disc recorded in CD-DA format and properly
finalized.
(1) Select CD mode by pressing the SOURCE button when the source is not in CD mode
The default source is CD.
- Up to 499 music can be displayed and can be playback.
(2) After a disc is inserted, the display will indicate the information as below.
- CD-DA : displays total number of tracks and total playback time.
→ Track : 27 tracks
Total Playback Time: 1hour 19min. 10sec.
- CD-MP3 : displays total number of folders and total number of files.
→ Folder : 64 folders
Track : 257 tracks.
(3) Select a track or a file to playback using the select button and the encoder switch.
- CD-DA: select I◀◀▶▶I using the SELECT button and select the track to playback by turning the
ENCODER switch.
- MP3: • select 111 using the SELECT button and select the folder by turning the ENCODER switch.
• select I◀◀▶▶I using the SELECT button and select the track to playback by turning the
ENCODER switch.
(4) Press the 111111 button to play.
To skip the track during playback, select I◀◀▶▶I using the SELECT button and select the track to
playback by turning the ENCODER switch.