Inter-M CD-6208 - Manual (Page 18)

MULTI SOURCE PLAYER
16 CD-6208
2) USB copying
The music files in USB (MP3 or WMA) can be copied to the internal memory.
.
(1) Press the 1111111 button to copy the files in the USB.
The 1111111 button is lit in red and the window displays ”CD -> REC”.
Press the 1111111 button again then the window displays ”USB -> REC”.
(2) Turn the 111111 switch or press the memory disc select button to select the wanted memory disc from
1 to 6 to memory the music files in the USB.
If no input, then recording function will be stopped after 7 seconds since the REC button is pressed.
(3) Press the 111111 button.
Press the 111111 button again when the window displays ”DELETE DISK?” to start recording.
Recording will start after initialization of the memory disc.
The window displays ”INIT”.
(4) The window displays the recording status as below.
”T257” means the total files in the USB. ”1” means the recording file.
”REC 100%” means memory remains.
(5) To stop recording, press the 111111 button long.
If 111111 button is pressed during recording, the file in recording will be deleted.
(6) The memory disc is played after recording.
[NOTE]
1. Be sure that the files in the memory disc before recording are deleted when recording starts.
2. CD-6208 can play the MP3 file which has 44.1kHz sampling frequency and 64kbps~320kbps bit rates.
CD-6208 can play the WMA file which has 44.1kHz sampling frequency and 64kbps~320kbps bit
rates, or 48kHz sampling frequency and 64kbps~192kbps bit rates.
3. When copying music files in a USB to the internal memory disc, the track number of the copyed files
from the USB to the internal memory is numbered according to the order that files are copyed to the
USB. If playback sequence is needed, then copy files to the USB which has no MP3 files in the order
of wanted playback sequence respectively.
4. Maximum 32GB USB memory can be used.
6. DELETE
Delete function is used to delete the files in the memory discs.
1) Delete all the memory discs.
(1) Press the 11111 button.
1