Inter-M MA-106 - Manual (Page 12)

PUBLIC ADDRESS AMPLIFIER
10 MA-106
Specifications Specifications
MA-106
Rated Output Power 60W
Speaker Output Power / Impedance 15.5V/4Ω, 25V/10.5Ω, 70V/82Ω, 100V/167Ω
Input Sensitivity / INPUT 1 -50dBV / 2kΩ
Impedance INPUT 2(MIC) -50dBV / 2kΩ
INPUT 2(LINE) -10dBV / 20kΩ
INPUT 3 -10dBV / 10kΩ
TEL IN 0.775 / 600Ω
Frequency Response (±3dB) 80Hz ~ 15kHz
T.H.D (at 1kHz Rated Output) Less than 1% at 60W(with AES-17 filter)
S/N INPUT 1,2 Better than 60dB
INPUT 3, TEL IN Better than 70dB
Tone Control BASS (100Hz) ±12dB
TREBLE (10kHz) ±12dB
Operating Temperature -10°C ~ +40°C
Power Source 100–120VAC or 220–240VAC, 50/60Hz
(Supplied AC mains depends on country requirements)
Power Consumption 24W
Weight 3.0kg/6.6lb
Dimensions 300(W) x 44(H) x 230(D)mm/11.8(H) x 1.7(H) x 9.1(D)in
* Specifications and design subject to change without notice.
Remark: 1. All specifications are measured with AES-17 filter.
2. This sytem is used digital Amplifier (PWM Modulation) so the PWM leakage signal will appear to
output terminal, but it doesn’t matter. You can’t hear the PWM leakage sound because of PWM
frequencies is very higher than Audio frequencies.
* 0dBV = 1.0Vrms