Inter-M MA-106 - Manual (Page 8)

PUBLIC ADDRESS AMPLIFIER
6 MA-106
7. INPUT 2 TERMINAL
This is a balanced input terminal and connected with the mic signal or the external units.
8. INPUT 2 LEVEL SELECT SWITCH
This switch selects the input signal of INPUT 2.
9. INPUT 1 TERMINAL OF REAR PANEL
This is a balanced XLR input terminal that the signal is inputted.
If the front panel’s MIC input terminal is connected with 6.3ø Phone Jack, the rear panel’s MIC input terminal
don’t output the signal.
10. SELECT SWITCH OF INPUT 1 PHANTOM MIC
This switch selects a kind of INPUT 1’s MIC on the rear panel.
Be able to use either DYNAMIC MIC or CONDENSER MIC, and the phantom power of +15V is supplied
when using the condenser mic.
MIC : Select in case of using a general dynamic mic
PHANTOM MIC : Select in case of using a condenser mic
11. THE PRIORITY CONTROL VOLUME OF INPUT 1
The output of INPUT 2,3 is controlled by the priority control volume of INPUT 1 when the signal is inputted to
the INPUT 1 terminal.