Inter-M PMU-360N - Manual (Page 15)

MIXING AMPLIFIER
13 PMU-360N/480N/600N
Web Setting Web Setting
1. Accessing PMU-N Series Web-page
- If IP address has not been set, type the default IP address (192.168.1.99) – by pushing the factory set switch
more than 5 second, the unit will be reset as default mode.
When connected normally, user verification window will pop-up.
Type the created ID and PASSWORD to log in. (Default ID: admin, Password: 1)
※ Changing password: please refer to the section of ‘11. password setting’
※ Caution : It is better to set and use the assigned password for the security purpose.
Please make a note to keep the assigned password.
2. Network Setting
This is network setting page. The host name is used for each of identification when multiple unit is in auto
searching mode.
※IP address : Network information automatically set by DHCP (Dynamic IP address) or can be set as Static
IP address.