ION Audio iLP - Manual (Page 12)

12
Problem Cause Solution
The recording sounds
loud and distorted. The volume level is too
high. Record again at a higher volume:
• If your sound source has its own gain knob or
volume knob, adjust it so it is about 50-80% of
the way to its highest setting—or higher, if
needed.
• Adjust the volume slider in the app (next to the
volume level meter).
Note: The loudest part of the song should reach
the orange part of the meter.
The recording is too
quiet. The volume level is too
low.
I can't hear my
recordings once I've
transferred them and try
to play them on my
computer.
Your computer's audio
output (playback
device) is not set
correctly.
Make sure that your computer's soundcard is
selected as your playback device.
Windows XP: Click Start Menu f Control
Panel (or Settings f Control Panel in Classic
View) f Sound and Audio Devices. Click the
Audio tab and under Sound playback, select
your computer's soundcard as the default device.
Windows Vista: Click Start Menu f Control
Panel (or Settings f Control Panel in Classic
View) f Hardware and Sound f Sound. Click
the Playback tab and select your computer's
soundcard as the default device.
Windows 7: Click Start Menu f Control Panel
f Sound. Click the Playback tab and select your
computer's soundcard as the default device.
Mac: Click the upper-left "apple" icon then click
System Preferences
f Sound. Click the
Output tab. From the menu, select Internal
Speakers if you are using the computer's internal
speakers, select Line Output if you are using
speakers, or select Headphones if you are using
headphones attached to the 1/8" output.