By-passing relays with the pulsar, Using the voltage probe, B. connect in line with the pulsar – IPA Tools 9001 Pulsar Master Kit User Manual

Page 15: And connect to the circuit, The pulsar, A. select manual or automatic mode, C. remove the relay from the circuit to be tested, D. install the adapter in place of the relay, E. set the amperage limit and begin sending power, Connect the voltage probe to the pulsar

Advertising
By-passing relays with the pulsar, Using the voltage probe, B. connect in line with the pulsar | And connect to the circuit, The pulsar, A. select manual or automatic mode, C. remove the relay from the circuit to be tested, D. install the adapter in place of the relay, E. set the amperage limit and begin sending power, Connect the voltage probe to the pulsar | IPA Tools 9001 Pulsar Master Kit User Manual | Page 15 / 16 By-passing relays with the pulsar, Using the voltage probe, B. connect in line with the pulsar | And connect to the circuit, The pulsar, A. select manual or automatic mode, C. remove the relay from the circuit to be tested, D. install the adapter in place of the relay, E. set the amperage limit and begin sending power, Connect the voltage probe to the pulsar | IPA Tools 9001 Pulsar Master Kit User Manual | Page 15 / 16
Advertising
Popular Brands
Popular manuals