Jackco Model 66200B - Manual (Page 3)

Turn the handle clockwise.
Move the handle up and down. Use the full stroke of the piston for
greater speed.
Support the vehicle with appropriate jack stands.
To Lower a vehicle:
Lift the vehicle to remove the jack stands, ensuring that there are
no persons or obstructions under the vehicle. Turn the handle
counter-clockwise.
To Lift a Vehicle:
OPERATING INSTRUCTION
3
1. Prior to operating the jack, remove any accumulated air from the system as follows
(1) Insert the handle into the socket and secure it with the screw provided
(2) Pull the handle and turn it clockwise and whilst held in this position, pump the jack
several times to ensure internal lubrication and bleed the accumulated air from the
system.
2 Release the handle and it will automatically return back to the initial position. The jack is
now ready to be used.
Important: prior to lifting the load, ensure that all of the safety instructions are followed.
3. The wheel of the jacks should always be rotated freely.
4. The jacks are fitted with a foot pedal that gives a faster approach to the load.
5. The jacks are fitted with 2 safety device that offers smooth and uniform lowering.
6. Once the vehicle had been lowered, release the handle and it will automatically return
back to the initial position