Janam XT85 - Manual (Page 19)

Setting Up the XT Series Device XT85 User Manual
Janam Technologies LLC 3 ―2
Slide SIM card
cover left to
open, right to
close
Slide microSD
card cover left
to open, right
to close
Notes:  The Keyboard-Controlled reference image represents the QWERTY keyboard
model. The Numeric keyboard differs, but its navigation keys are identical.
 Changing the display orientation to either of the landscape options will
automatically alter the keyboard’s Screen Scroll Up/Left and Screen Scroll
Down/Right buttons, reversing their functions to meet the requirements of the
display’s landscape setting.
Locating Key Controls and Components (continued)
microSD and SIM Card Slots (located beneath removable battery)
 IMPORTANT NOTE!
To avoid possible damage to microSD and/or SIM cards or the XT Series device,
ESD (electrostatic discharge) precautions are recommended when installing or
removing
microSD and/or SIM cards. At a minimum before handling, discharge
any personal static electric buildup to a point of discharge other than the device.
To access the microSD and SIM card Slots:
1. Loosen the handstrap to provide sufficient clearance.
2. Remove the battery to expose the microSD/SIM card cover.
3. Using the microSD /SIM card cover release notch, gently pull the
hinged microSD/SIM card cover open.
Note: Additional pictorial references
supporting microSD card installation are
provided on page 3 of this chapter.
microSD Removable Memory
XT Series devices are compatible with microSD memory cards
with a capacity of up to (and not more than) 32 GB.
To install a microSD card:
1. Unlock the metal microSD card cover by sliding it approximately
1/32” to the left.
2. Lift the hinged microSD card cover, exposing the slot
contacts.
3. Carefully lay the microSD card (with its contacts
facing down) onto the microSD card slot contacts,
being sure to align the mating slot and microSD card
notches.
microSD/SIM card
cover release notch
SIM card slot
microSD
card slot
microSD /SIM card cover