Janam XT85 - Manual (Page 49)

Data Capture—Barcode Scanning XT85 User Manual
Janam Technologies LLC 6 ―7
Scanning Demonstration (Imager-based configurations continued)
To run the Scanning Demonstration:
1. Return to Windows Mobile Start screen.
2. From Utilities (folder), tap Scan Demo.
3. Aim device Scan Window at a barcode.
4. Tap Scan or press Scan Trigger.
 Tip: For best results hold the XT device at a slight angle in
relation to the barcode. Scanning straight on is not
recommended because light reflected from the material
the barcode is printed on can interfere with scanning.
9. Confirm display of the scanned sample barcode. A successful scan
is confirmed with scan results appearing in the Data window.
Another means of confirming a successful, decoded scan is
provided by the top-facing LED, located at the upper edge of the
device. This LED will turn red when a scan trigger is depressed and
turned green after a successfully decoded scan.
Note: The top facing LED cannot provide scan status
information when the device is connected to an
external power supply. When connected to an
external power supply, the top facing LED
functions only to indicate charging status.
10. Tap OK to return to the main demo.
Primary
Scan
Trigger