Joyce DIA201 - ACME 1 diameter, .25" pitch, .50 lead"" User Manual
Page 12
12
3-4 Integrated Actuator Part Number Structure & Serial Number Tag
IA51- TT - 12.00 – LJ20 - MMAA- KS
Model number
•
Machine Screw - IA51, IA201, DIA51, DIA201
•
Ball Screw - BIA51, BIA201, HBIA51
Design
•
TT – Translating Tube
•
TN – Traveling Nut
Rise in inches (max 24.00”)
Auxiliary drive shaft
•
XXXX – None (Remove Shaft)
•
STDX – Standard 0.5” shaft
•
LJ10 - Optional LS7-402 Limit Switch in Position 1
•
LJ20 – Optional LS7-402 Limit Switch in Position 2
•
LJ30 – Optional LS7-402 Limit Switch in Position 3
•
LJ40 – Optional LS7-402 Limit Switch in Position 4
C-Face Motor Mounting
•
MMAK – 1/4 HP Motor
•
MMAA - 1/3 HP Motor
Note: Unless specified in options below, all
•
MMAB – ½ HP Motor
motors listed here are 230/460v, 3 ph., 60 hz.
•
MMAC – ¾ HP Motor
•
MMAX- No Motor
Options: Include as many codes as necessary
•
X=No additional options
•
M=Additional specification required (comment as necessary)
•
C12=12VDC Motor
•
C24=24VDC Motor
•
C90=90VDC Motor
•
C180=180VDC Motor
•
K=Brake motor (see availability below)
•
R=1140 rpm
•
S=Single Phase Motor (115/230 1ph 60Hz )
Example: IA51TT-12.00-LI20-MMAA-KS is a 5:1 Ratio translating tube integrated actuator with 12” travel, a LS7-
402 limit switch in position 2, and a 1/3 HP single phase brake motor.
Serial Number Tag
To obtain product information needed for maintenance, repair, and reorder,
contact Joyce Dayton Corporation and provide the serial number.