Aiwa TV-F2000u - Manual (Page 9)

ENGLISH
Connect the antenna cable to the ANTENNA connector on the TV.
If the cable is a round-type 75-ohm coaxial cable, connect it directly to the ANTENNA connector.
If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor (supplied), and connect the adaptor to
the ANTENNA connector.
Connect the AC cord to the AC wall outlet.
When you are using TV-F2000, connect the AC cord after passing it through the AC cord hook on the rear.
Connecting the antenna
Basic connections
PREPARATION
2
1
4
75-ohm
coaxial cable
(not supplied)
300-ohm twin-lead cable
(not supplied)
Antenna adaptor
(supplied)
1
2
To AC outlet
To prevent the unit from falling during earthquakes, etc.,
Fix the unit even to a wall or pillar with the security hook located on the rear using the strong twine or wire.
Security hook
CONTINUE
Strong twine
or wire
(not supplied)
AC cord hook
(TV-F2000 only)
To ANTENNA connector
TV-F2000
TV-F2000
Security hook
TV-F2400
Strong twine
or wire
(not supplied)