Atlas Sound Sound Masking Generator/ Equalizer ASP-MG24 - Manual (Page 9)

OWNER'S MANUAL
Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435
© 2007 ATLAS SOUND LP Printed in U.S.A. ATS002766 RevA 4/07 9
ASP-MG24
6.2 Gain – For you convenience both Mic / Line Inputs and the four masking generators levels are shown.
Controlling the gain can be accomplished by dragging the fader, using the up down buttons or by typing in the
number viewing text box. Channel Mute can be accomplished by clicking on the Mute tab and will illumination
Red indicating the channel is in Mute. Input Polarity can be set by clicking on the Polarity tab.
6.3 Compressor – Inputs 1 & 2 have fully adjustable compressor limiters. When clicking on the compressor
tab, two sub viewing screens will appear. Note: All control boxes can be dragged for desired positioning of the
screen. Screen 1 is an indicator screen showing the compressor / limiter operation. The second is the settings
screen. In that screen you have control over Threshold, Attack, Release and Ratio. Adjustment can be made
using the Up / Down arrows or by typing into the data viewing text box.
• THRESHOLD - Limit Threshold. Ranges from -20 to +20dBu in 0.5dB steps.
• ATTACK - Attack time. Ranges from 0.3 to 1ms in 0.1ms steps, and ranges from 1 to
100ms in 1ms steps.
• RELEASE - Release time. Can be set at 2X, 4X, 8X, 16X or 32X the attack time.
• RATIO – The Ratio control allows adjustment to the amount of Input vs. Output level with
signals exceeding the set threshold limit.