LevelOne FCS-0071 User Manual
Page 51
Advertising
FCS-0071 User’s Manual
50
50
then click on “Upgrade” button.
5. The upgrade should start in minutes, depending on file transferring status. The web will
then be directed to the system writing progress. Overall upgrading process takes about
5~10 minutes. In this period, DO NOT DISCONECT the power. System of the unit can be
damaged otherwise.
6. The power LED (orange one) will be quick/slow flashing during the upgrading process.
When it becomes again steady on, camera is ready to be accessed. Check the firmware
version. If somehow system is not upgraded, redo above steps. In the case, restore factory
default process may be required.
-------- End of Document ------
Advertising