LevelOne FCS-8006 - Manual (Page 56)

Intelligent Surveillance Solution
LevelOne IP CamSecure
- 55 -
For IP cameras
The Encode Video function will reduce frames or re-encode original streaming from IP cameras. To save Hard
Disk usage, adjust framer ate with original video format or re-encode to smaller file size by adjusting frame
rate, resolution and Quality/Bit rate.
Keep Original Video format:
Select this option to reduce frame rate only but not to re-encode video
streams to save Hard Disk usage.

Adjust MJPEG video frame rate: Move slider to left to reduce frame
rate.
Note: The maximum FPS will correspond to original video streams set up
on camera configuration.

Keep key-frame only: System will only record key frames of video
streaming.
Note: The key frame interval is controlled by each camera
manufacturer and cannot be adjusted.
Customized encoding: * not available under Lite License
The video stream will be decoded then re-encoded by configuration.
Click “Setup” button to adjust “Encoder Parameter”.
Note: Customized encoding function causes high CPU usage,
make sure the PC specification is enough (recommend Core 2
Quad or above )
For Analog cameras
The Encode Video function sets Frame Rate, Quality, and Resolution that you
want to record and provides an approximate recorded time period.
For FCS-8005/8006 capture cards you may additionally choose from different
video formats, including Mpeg4 and H.264.