LevelOne FCS-8006 - Manual (Page 67)

Intelligent Surveillance Solution
LevelOne IP CamSecure
- 66 -
Step 3:
Select the device that is connected to your system, that is, the PC you are working with. You can
enable the Automatically Popup I/O Control Panel check box to obtain the correspondent panel to
monitor the I/O status.
Note: You should adjust the setting of I/O device in Config>Setting>I/O Device first, the I/O control
panel will display the device status based on it. You can also adjust the size of the panel by dragging
a mouse or click the
on the right top of the display window.
4.2.8 Action Type –Send an SMS message
The system will send an SMS message immediately to
given accounts indicating the type and time of
event.
* Note: This function is not available under Lite License.
Step 1: Select the “Send a SMS message” action and then click
OK.
Step 2: The responding windows will popup to Select Contactor
(You can choose one or more contacts). Click the
“Send an SMS message” indicator to modify the setting.
Note: To configure a GSM modem for the system, go to
Config - Setup - Hotline. See Configuration at page 77.
4.2.9 Action Type – Send to Central Server
This action will send an event and snapshot to the
Central Management Server (separate software package, not included).
* Note: This function is not available under Lite License.
Step 1: Select the “Send to Central Server” action and then click OK.
Note: Please refer to the CMS user manual for details on using the Central Management System.
4.2.10 Action Type – Send snapshot to FTP
The system will upload a snapshot immediately to FTP site.
* Note: This function is not available under Lite License.
Step 1: Select the “Send snapshot to FTP” action and then click OK.
Note:
1. For Digital Input Events, this warning action will send the snapshot of the associated camera.
Please refer to I/O settings for details.
2. To define an FTP server, go to Config > Setup > Hotline. See Configuration at page 77 for detail.
4.2.11 Action Type – Popup E-Map on Event
The system will auto popup E-Map window and show the assigned map and indicator.
* Note: This function is not available under Lite License.
Step 1: Select the “Popup E-Map on Event” action and then click OK.
Step 2:
The responding window will popup to Popup e-map on event.
Click the “Popup E-Map on Event” indicator to modify the setting.
Step 3:
Select the Map Layer and Indicator, and then click OK.
Note: To edit E-Map, see Configuration at page 90.
4.3 Advanced Settings
Click on the Advanced button on the bottom of the Event and Action Configuration dialog for advanced
settings.