LevelOne WCS-6050 - Manual (Page 41)

Network Camera User’s Manual
41/54
Trigger mode
(1) Video motion detection: Enable/Disable video motion application.
(2) Periodically: This option allows the Network Camera to trigger
periodically for every other defined minute.
(3) Digital input: This option allows the Network Camera to use an external
digital input device or sensor as a trigger source. Depending on your
application, there are many choices of digital input devices on the market
which helps to detect changes in temperature, vibration, sound, and light,
etc.
Parameters
(1) Motion parameters: Higher sensitivity and small threshold will allow
easier motion detection.
(2) Period parameters: This option allows the Network Camera to trigger
periodically for every other defined seconds. Up to 999 seconds are allowed.
(3) Digital input parameters: Select the digital input type and set trigger
time.
Media mode
There are three choices of media types available: Snapshot, Generate digital
output signal, Record (Motion Detection only) and System log.
Snapshot & Record file setting
You can setting the file name, and enable or disable to add the date and time
on file name. Can setting the digital output duration seconds.
Response mode
There are five choices of server types available: Email, FTP, NAS, SD Card,
and USB storage. Select the item to display the detailed configuration options.
(1) Email
-- Email security mode: If your SMTP server requires a secure
connection (SSL or TLS), check this server requires a secure connection
(SSL or TLS).
-- Sender email address: Enter the email address of the sender.
-- Recipient email address: Enter the email address of the recipient.
-- Server address: Enter the domain name or IP address of the email
server.
-- User name: Enter the user name of the email account if necessary.
-- Password: Enter the password of the email account if necessary
-- Server port: The default mail server port is set to 25. You can also
manually set another port.
(2) FTP
-- Server address: Enter the domain name or IP address of the FTP
server.
-- Server port: By default, the FTP server port is set to 21.
-- User name: Enter the login name of the FTP account.