LevelOne WCS-6050 - Manual (Page 46)

Network Camera User’s Manual
46/54
Maintenance
1. Reboot system: The Reboot button will reboot the Network Camera. It’s
useful while the Network Camera has problems and needs to be rebooted.
2. Restore system: Click on Restore button on the configuration page to
restore the factory default settings. Restore all settings to factory default
except settings in Network type and Root Password. The system will restart
and require the installer program to set up the network again.
3. Calibrate: Recalibrate the home position to the default center to recover the
tolerance cased by some external forces. Please note that there is no
confirming message box after clicking on the Calibrate button. The Network
Camera will calibrate immediately.
4. Upgrade firmware: Select the firmware file and click upgrade button. Please
be aware that you should not turn off the power during updating the firmware
and wait for finish message.