LevelOne NVR-0216 - Manual (Page 29)

[NVR MANAGEMENT SOFTWARE USER MANUAL] 29
By default, the program does not have any area configured for motion
detection; you can quickly click on “Select All” to enable the whole
area for motion detection. You can always click on “Clear All” at
anytime to start over
To configure a particular area for motion detection, simply click and
hold down the mouse left button and move diagonally to select a
desired area. You can do it repetitively to configure multiple areas for
motion detection
The configured areas will then be highlighted on the video with green
cell boxes. Click “Submit” to save the configuration