LevelOne NVR-0216 - Manual (Page 38)

38 [NVR MANAGEMENT SOFTWARE USER MANUAL]
Configure E-Map
The program provides two-layered e-map, which the top layer displays
the location of all NVRs and the second layer (sub-map) displays
locations of all cameras connected to one NVR.
* You can create up to 16 sub-maps and one for each NVR.
This function is particularly useful when motion detection is configured.
You can simply place the e-map on one monitor and whenever there is
motion detected, the NVR will be highlighted on the map and live video
will be displayed for live event monitoring.