LevelOne NVR-0216 - Manual (Page 112)

112 NVR-02 Series User Manual
Event settings - CMS events
Next, you can enable NVR to receieve events from the CMS software,
which will then triggers the NVR to start recording.
** The CMS has its own analytic functions, once they are configured,
the CMS will send notifications to the NVR as soon as they are
triggered.
Event settings - Event action
You will be presented with this page if the NVR comes with built-in
digital output ports. You can then configure which output port to be
triggered when any of the previously configured events are triggered.
Finish
Once you finish, you will be prompted with a message asking whether
you’d like to configure another camera with the setup wizard.