LevelOne NVR-0216 - Manual (Page 97)

NVR-02 Series User Manual 97
Next, select channels, which you would like to backup the recording
data from. Maximum 4 channels can be selected at once
Configure the start and end time of the recording data you would like
to backup and click the “Backup” button to begin.
Things to pay attention to the USB Backup function
Limitation:
• It does not support USB Hub extend the number of HDD connected
to the NVR
• Only one backup process can be performed at a time
• Maximum 4 channels can be selected for backup
• Only FAT32 USB hard disk is supported for backup
• The USB hard disk needs to have more than 100MB remaining space
• If multiple partitions are presented in one disk, only the first
partition will be detected and used for backup
Process:
• Progress will be displayed on the UI
• If the backup process gets interrupted, which the process stops at a
point of time that is before the “END Time” user defined, such time will
be displayed on the UI
• A folder will be automatically created in the USB hard disk with a
name format like 0028687831_20100610151515_2010060511
0010_20100606110010 (MAC_backupbuttonclicktime_starttime_
endtime)
Note:
• Please plug in the USB HDD only after the NVR is fully started, or
the HDDs will be incorrectly mounted.