LevelOne WBR-6022 - Manual (Page 27)

26
6.2.2 Search IP camera and Storage
Press the “Search New Device” icon, the HomeGuard would try to search all compatible devices on LAN, and would list
them all in web page, Please prepare the IP camera & NAS device’s ID/password, it needs to input the info during the
register process.
Notice: please use the IP network camera default http port 80, or you just reset the IP camera to default, because it may
register failed or no video to view.
6.2.3 Register IP camera and Storage
You have to name each device with unique ID, and for each IP camera, you MUST enter the correct User
Name/Password with administrator permission.
After press “Register” button, the page would show you the time information of this system. Please check the time
setting, it would be used for all devices paired with HomeGuard system. If you used Easy-Setup to configure once, the
time information should be set already.
After pressing SAVE icon, HomeGuard system shows the saving result and then the register process is done, like
following screen:
Notice: please use the IP network camera default http port 80, or you just reset the ip camera to default , because it
may register failed or no video to view.