Mac address control – LevelOne WBR-6022 User Manual
Page 62
61
MAC Address Control
The Domain Filter enables you to prevent users from accessing specific domain addresses (web
sites).
To enable MAC Address Control, make sure to tick on Enable.
There are two types of controls available:
• Connection Control: To control which wired and wireless clients can connect to this device. If
a client is denied access, it means the client cannot access the Internet either. Choose “allow”
or “deny” to allow or deny the clients whose MAC addresses are not in the list.
• Association Control: To control which wireless client can be associated with this WBR-6022.
If a client is denied, then it means the client cannot send or receive any data via this
WBR-6022. Choose “allow” or “deny” to allow or deny the clients with MAC addresses that are
not in the list to associate to the wireless network.