Led indicators, Installation steps – LevelOne WBR-6801 User Manual
Page 7
7
LED indicators
LED color
Description
USB LED
Blue
3G/3.5G is on
Blue
in flash
Data access
Wi-Fi LED
Blue
WLAN is ON
Blue
in flash
Data access
Blue in fast flash
Device is in WPS Mode
Installation Steps
DO NOT
switch on 3G Portable Router before
performing the installation steps below.
Step 1.
Turn off the power switch and then plug USB 3G
Modem to the Router.
Note: 150Mbps N Wireless 3G Portable Router is
designed to work with either UMTS or EV-DO and
even HSUPA 3G modem. Please refer to your service
provider for detailed feature information.
Step 2.
Plug your USB modem which is with activated USB
dongle.
Step 3.
You can choose either Power Adapter or USB Cable
for power supply.
3.1. Use Power Adapter
Connect with the power adapter to the receptor
on the back panel of it.
3.2. Use USB cable
Connect USB Cable to the same place of it.
LED Indicators
Power LED