LevelOne WBR-6804 - Manual (Page 21)

21
B. iBurst
1. WAN Type: Choose iBurst for WAN connection.
2. Account: Enter the User Name for iBurst connection.
3. Password: Enter new Password for iBurst connection.
4. Primary DNS: You can assign a Primary DNS server if required. (Optional)
5. Secondary DNS: You can assign a Secondary DNS server if required. (Optional)
6. Connection Control: There are 3 options to start connection:
 Auto Reconnect (Always-on): The device will always try to link to Internet.
 Connect-on-demand: The device won’t try to connect to Internet until LAN PCs or devices
try to go to Internet. Once Internet connection is established, this device will drop the
connection if maximum idle time is reached.
 Manually: The device won’t try to connect to Internet until users press “connect” button at
Status page. Once Internet connection is established, this device will drop the connection
if maximum idle time is reached.
7. Maximum Idle Time: The amount of time of inactivity before disconnecting Internet
connection. Set it to zero, or choosing “Auto-reconnect” mode to disable this feature.
8. Service Name: Input the service name if your ISP requires it. (Optional)
9. Assigned IP Address: Input a IP address if your ISP requires it. (Optional)