LevelOne PLI-4051 - Manual (Page 26)

24
4.2 Adding Bridge C to existing Network AB (Network ABC)
One unassociated Bridge C is added to an existing Network AB.
The procedure is as follows:
1. Press and hold the Security button on Bridge C for 10 seconds. Release it when the Power
light flashes. The password to Bridge C has just been erased. It must now be linked to your
network to adopt the new network security key.
2. Press and hold the security button on Bridge A for 2 seconds. The Power light on Bridge A
starts to flash.
3. Within 120 seconds after the Power light on Bridge A starts to flash, press and hold the
security button on Bridge C for 2 seconds then release.
4. Bridge A, Bridge B and Bridge C are now networked to each other.