LevelOne FNC-0107TX - Manual (Page 4)

4
Introduction
Hardware Overview
The FNC-0107TX adapters are highly integrated and
cost-effective single-chip Fast Ethernet Adapter that provides
32-bit performance, PCI bus master capability, and full
compliance with IEEE 802.3u 100Base-TX specifications.
This adapter supports both 10Mbps and 100Mbps network
speed, 100BaseTX operates on two pairs of category 5 UTP
cable and 10BaseT operates on Category 3, 4, 5 UTP cable.
With the Auto-Negotiation technology, network speed is
auto detected. When you connect the adapter to 10BaseT hub
via UTP cable, the network speed becomes 10Mbps. Similarly,
if you connect the adapter to 100BaseTX hub, the network
speed is 100Mbps. If the hub is a switching hub which supports
full duplex function, then the speed will be doubled to
20Mbps/200Mbps.
This adapter supplies many drivers including ODI driver for
NetWare 3.x/4.x/5.x, NDIS driver for Microsoft LAN Manager,
Windows 98SE/ME/2000/Vista/Win 7, Linux, and a Packet
Driver for TCP/IP software. Whatever your requirements are
ease of installation, superior performance or responsive
support backed up by unlimited technical support, this adapter
is the superior choice.