LevelOne FNC-0107TX - Manual (Page 8)

8
Wake-On-LAN
The PC does not boot up when a Magic Packet or Wake
up Frame is sent.
1. Check the specification of this PC meets the hardware
requirement.
2. Enable the WOL function or the power-ON function of the
PC. Verify the BIOS setting of Wake-On-LAN is configured
properly. The name of this function is system dependent,
but may be located in a category heading titled something
like Power Management. (Please check your computer
owner’s manual for more information regarding the CMOS
Setup Utility and BIOS settings.
3. Boot up the PC again.
4. If the adapter still does not wake up, the reason might be
tha
t your computer’s BIOS do not fully ACPI-compliant.
Your first step should be to contact your computer dealer
or motherboard maker to see if you need to upgrade your
computer’s BIOS.