LevelOne GES-2452 - Manual (Page 71)

Web Smart Switch
71
3.5.4 ACL Policy Setting
The following table describes the labels in this screen.
LABEL DESCRIPTION
Policy Index You can choose the policy index.
Get To get the basic information of the policy index.
VLAN ID Enter VLAN ID and check it to care specified VLAN ID.
Port Number Enter port number and check it to care specified port number.
Action Select the action to take:
 Mirror Index: mirror packet via the configuration of specified mirror
index.
 Rate Limit: limit packet rate, the unit is 16kbps.
 Priority: change packet priority.
Apply Click Apply to save your changes to the switch.
3.6 QoS
Use the QoS pages to configure settings for the switch QoS interface and how the switch connects
to a remote server to get services.
3.6.1 Port-based Priority
You can configure the switch to assign an IEEE 802.1p priority to packets based on the ingress
(incoming) port of the packet.
Click QoS > Port-based Priority in the navigation panel to display the screen as shown below.