LevelOne GES-2452 - Manual (Page 81)

Web Smart Switch
81
The following table describes the labels in this screen.
LABEL DESCRIPTION
Community Enter a Community string, this will act as a password for requests from
the management station.
Type SNMP community type:
 Read-Only: Read all objects only, it can allow the SNMP manager
using this string to collect information from the switch.
 Read-Write: Read and write all objects, it can allow the SNMP
manager using this string to create or edit MIBs (configure
settings on the switch).
Add Click Add to add any other community.
No It displays the port number which in the community.
Community This field displays the community strings.
Access Type This field displays the community string’s type. This will either be
read-only or read-write.
Delete Click Delete to remove any selected community strings.
3.7.1.3 SNMP Trap
This page allow user to add or delete SNMP trap receiver IP address and community name.
Click Management > SNMP->SNMP Trap to display the screen as shown next.
The following table describes the labels in this screen.
LABEL DESCRIPTION
IP Address Enter the IP addresses to send your SNMP traps to.
Community Enter a Community string, which is the password sent with each trap to