LevelOne IES-0840 - Manual (Page 13)

13
PoE
PoE
1. System power budget:
System power budget and type a new system power
budget.
2. OK: OK button to update your settings.
3. Enable mode: C Enable mode drop-down menu to choose Enable or Disable
Enable mode drop-down list to enable or disable Port 1 ~ Port 4 to discover Powered Device
(PD) connected to Port 1 ~ Port 4 of the Switch.
4. Power limit by classification: Check or uncheck Power limit by classification to enable or
disable Port 1 ~ Port 4 to provide power to PD according to classification of maximum power
range used by PD.
5. Fixed power limit(W): First uncheck Power limit by classification to disable Port 1 ~ Port 4 to
provide power to PD according to classification of maximum power range used by PD. Then
c
Fixed power limit(W) fixed power limit for Port 1 ~ Port 4 to
provide power to PD.
6. Power priority: Cli Power priority drop-down menu to choose Low , Middle , or High
Power priority drop-down list to determine power priority of Port 1 ~ Port 4.
7. OK: OK button to update your settings.