LevelOne IES-0840 - Manual (Page 17)

17
System Setup
System Setup
System Configuration:
1. DHCP Client: Click and choose Enable or Disable to enable or disable the Switch as DHCP
client to be automatically supplied an IP address, gateway address, and subnet mask from
DHCP server.
2. IP Address: C IP Address text box and type a new address to change the IP Address.
3. Subnet Mask: C Subnet Mask text box and type a new address to change the Subnet
Mask.
4. Default Gateway: C Default Gateway text box and type a new address to change the
Default Gateway.
5. Cancel: Cancel button to cancel your settings.
6. OK: OK button to update your settings.
Password Configuration:
1. Old Password:
Old Password and type in the old password.
2. New Password: New Password and type in a new password.
3. Confirm Again: Confirm Again . Type the same password in New Password
text box again to verify it.
4. Cancel: Cancel button to cancel your settings.
5. OK: OK button to update your settings.
System Reset/Restore to default:
1. Load Default:
Load Default button to restore the default settings of the Switch.
2. Reset System: Reset System button to restart the Switch.