LevelOne WPS-1133 - Manual (Page 28)

28
Upgrade
Upgrade allows the user to upgrade the print server device. In order to upgrade the unit
please perform the steps as follows:
1. Click Upgrade button just like a picture ＜ ＞, as shown as follow picture
2. S elect General Upgrade. Make sure that the upgrade file(*.bin) is located in the same
directory as PSAdmin.
Reset
1. Click Reset button just like a picture ＜ ＞.
2. Reset allows the user to reset the print server device in order to establish a new
connection or for new settings to take effect.
Refresh
1. Click Refresh button just like a picture ＜ ＞.
2. Refresh searches all attached print server(s).