LevelOne WPS-1133 - Manual (Page 34)

34
Enter the print server’s IP address in the Address field of your Web browser. Press Enter.
Then the print server page will appear. From here you can configure all print server settings.
Please follow this information in the status menu of the print server:
System Status
1. Click Status, it then appears the sub-menu.
2. Click System, it then as shown in the following picture.
Print Server Name: This option allows you to view device name of the print server. To
correct the print server’s device name.
System Contact: This option allows you to view contact name of the print server. To check
the print server’s contact name who in charge of this device.
System Location: This option allows you to view Location name of the print server. To
confirm the print server’s location name where the print server is located
in the office’s LAN.
System Up Time: This option allows you to view uptime of the print server. When you start
the print server, it will compute the print server from start time to power off
time.
Firmware Version: This option allows you to view firmware version of the print server. To
verify the print server’s firmware version is newer in this time.