LiftMaster RSW12V Residential / Light Commercial Swing Gate Operator with Battery Backup - Manual (Page 2)

SOLAR PANEL KIT - 10 WATT
This kit is to replace or add a solar panel to the operator application. Up to three
solar panels can be connected to the operator.
Model SOLPNL10W12V
SOLENOID GATE LOCK (LOW POWER)
The automatic gate lock is a solenoid-driven lock that automatically unlocks when
the gate is open and locks when the gate is closed. Can be mounted onto a gate or
post. Can be released in case of emergency.
Model SGLOCK12V
OPEN
OPEN
CLOSE
BATTERY FOR GATE ACCESS SYSTEMS
The gate access system battery replaces or adds a battery to the operator
application.
Model 29-NP712 (7 AMP-Hour Battery, 12 Vdc, requires additional 7AH battery
harness)
Model A12330SGLPK (33 AMP-Hour Battery, 12 Vdc, harness included. Ideal for
solar applications and extended battery backup)
MAGNETIC GATE LOCK
Outdoor magnetic lock, transformer, junction box, mounting plate and hardware.
Not for use with Solar Applications. Must be powered separately.
Model MG1300
OPEN
OPEN
CLOSE
RESET SWITCH/BUTTON
The reset switch/button is located on the front of the operator and serves several functions.
OPERATION
Thank you for purchasing a LiftMaster gate operator.
Our operators are designed to meet or exceed UL325
safety standards and requirements and are quality
manufactured for years of safe and reliable service.
Think LiftMaster for all of your Access Control needs.
MODEL RSL12V SLIDE GATE OPERATOR
Model RSL12V has a reset switch. When referring to
“toggling” the reset switch it means pressing the reset
switch to the RESET/DISCONNECT position, then back
to the NORMAL OPERATION position.
To open and close the gate(s) manually, press the
reset switch to the RESET/DISCONNECT position. On a
dual gate application the reset switch must be pressed
on both operators. To resume normal function press
the reset switch to NORMAL OPERATION.
MODEL RSW12V SWING GATE OPERATOR
Model RSW12V has a reset button.
To open and close the gate(s) manually, press the
reset button. On a dual gate application the reset
button must be pressed on both operators. The next
command given by a remote control will close the
gate and return the operator to normal operation.
ACCESSORIES
1 6
RELAY KIT
Maglock release relay.
Model Q400MAU
OPEN
OPEN
CLOSE
BATTERY HARNESS
Required when a second 7 AMP-Hour, 12 Vdc battery is added to the operator.
Model K94-35225
VEHICLE SENSING PROBE
The vehicle sensing probe is buried in the ground and can detect a car as it
approaches and will then open the gate.
Model LM202
OPEN
OPEN
CLOSE