LockeyUSA TB-950 Magnum - Manual (Page 4)

LockeyUSA | PO Box 543, Mt Pleasant, MI 48858 | www.LockeyUSA.com
TB-950 Magnum Instructions 4
Lockey® TB-950 Magnum
Concealed, high use, pedestrian gate closer
(with hydraulic controls for closing & latching speed)
Step 7
Mount gate to post
Step 8
Adjust closing speed (hole nearest post) and
latching speed (hole farthest from post)
using 3mm Allen key
Installation Instructions
Step 6
After galvanizing/painting, grease roller
bearing, and replace parts into closer
housing #2 placing the drive plate #5 to the
correct handing and then place a small piece
of adhesive tape across drive plate #5 and
closer housing #2 to secure while mounting
gate
Maintenance
The regularity of maintenance should reflect the frequency of use, environment and the likelihood of van-
dalism or misuse. Should you require more information about gate closer maintenance, please contact
us using the contact information at the bottom of this page.
The following checks and lubrication should be regularly completed:
1) Check to ensure all fastenings are secure
2) Check function of closer
3) Lubricate roller bearing
Disclaimer
LockeyUSA will not accept any responsibility whatsoever for damage caused by incorrect fitting, misuse, or incorrect assessment of the
application. In purchasing this product, the purchaser accepts all responsibility for the installation, operation and maintenance of the
product.
For more information, please review LockeyUSA’s full warranty at www.lockeyUSA.com