Staub Electronics WB-100-VPS WATTBOX - VERTICAL MOUNT POWER STRIP - Manual

Congratulations on purchasing the WB-100-VPS WattBox ™ Power Strip
with Spaced and Rotated Outlets!
This Power Strip is designed to provide multiple AC outlets that will allow for
better management of power distribution. Note: This product does not provide
surge protection or noise filtration.
WATTBOX ™ POWER STRIP WARRANTY POLICY
WATTBOX ™ POWER STRIP LIFETIME PRODUCT WARRANTY
WattBox ™ warrants to the purchaser of any standard SnapAV power Strip that the power strip shall be free of
defects in design, material, or workmanship, and SnapAV will repair or replace any defective unit. For product
replacement, see “NOTIFICATION” below.
LIFETIME REPLACEMENT POLICY
Valid only in the United States and Canada. If your WattBox ™ power strip is deemed defective by SnapAV, you will
be furnished with a replacement product or an equivalent replacement to the latest technology of that product
category. Keep a copy of the original invoice to verify the product belongs to the original purchaser.
THIS POLICY IS SUBJECT TO THE CONDITIONS BELOW:
1. PROOF OF PURCHASE REQUIRED:
SnapAV’s equipment warranty policy extends to the original purchaser of the SnapAV product only and is
non-transferable. Original purchase receipts must accompany any product returned for warranty claims.
2. PROPER INSTALLATION:
WattBox ™ Power Strips must be directly plugged into a properly grounded 3-wire AC outlet. Extension cords,
non-grounded two prong adapters, or other non-SnapAV surge products must not be used. Building wiring
and other connections to equipment must conform to applicable codes (NEC or CEC). No other ground wires
or ground connections may be used.
3. NOTIFICATION:
You must notify WattBox ™ within fourteen days of any event precipitating a request for product replacement. A
return authorization (RA) number must first be obtained from the SnapAV Customer Relations Department at
www.snapav.com/support before returning the power strip to SnapAV. At this time, you must notify SnapAV if
you believe you have a claim for defective product / replacement. Once you obtain a RA number, please mark
the number on the bottom of the unit and pack it in a shipping carton/box with enough packing material to
protect it during transit. The RA number must also be clearly marked on the outside of the carton. Ship the unit
to SnapAV. Please note that you are responsible for any and all charges related to shipping the unit to SnapAV.
4. DETERMINATION OF DEFECTIVE PRODUCT:
SnapAV will evaluate the power strip for defects. The power strip must show signs of defects in design, material,
or workmanship Opening the enclosure, tampering with, or modifying the unit in any way shall be grounds for
an automatic denial of your request for replacement. SnapAV, after evaluating all information provided, shall, in
its sole discretion, determine whether or not your request is eligible.
5. REQUEST FOR REPLACEMENT:
Once SnapAV has determined that you are entitled to a replacement, SnapAV will, at its election send you
replacement equipment or equivalent.
6. EXCLUSIONS:
The WATTBOX™ POWER STRIP WARRANTY POLICY does not apply to: Service charges, installation costs,
reinstallation costs; setup cost; diagnostic charges; periodic checkups; routine maintenance; loss of use of the
product; costs or expenses arising out of reprogramming or loss of programming and/or data; shipping charges
or fees; service calls; loss or damage occasioned by fire, theft, flood, wind, accident, abuse or misuse, and
products subject to manufacturer’s recall or similar event.
7. DISPUTE RESOLUTION:
Any controversy or claim arising out of or relating to SnapAV’s Defective Equipment Policy, or the alleged
breach thereof, shall be settled by arbitration administered by the American Arbitration Association under
its Commercial Arbitration Rules. You may file for arbitration at any AAA location in the United States upon
the payment of the applicable filing fee. The arbitration will be conducted before a single arbitrator, and will
be limited solely to the dispute or controversy between you and SnapAV. The arbitration shall be held in any
mutually agreed upon location in person, by telephone, or online.
Any decision rendered in such arbitration proceedings will be final and binding on each of the parties, and
judgment may be entered thereon in a court of competent jurisdiction. The arbitrator shall not award either
party special, exemplary, consequential, punitive, incidental or indirect damages, or attorney’s fees. The parties
will share the costs of arbitration (including the arbitrator’s fees, if any) in the proportion that the final award
bears to the amount of the initial claim.
8. GENERAL:
If you have any questions regarding the product warranty please contact the SnapAV Customer Relations
Department at [email protected]. This warranty supersedes all previous warranties. This is the only warranty
provided with the power strip and any other implied or expressed warranties are nonexistent. This warranty may
not be modified except in writing, signed by an officer of the SnapAV Corporation
WB-100-VPS Manual & Instructions
WattBox ™ Multiple Outlet Vertical Power Strip
15 AMP – Aluminum Housing – 6 foot Power Cord
engineered by
LI
FE
TI
ME
PRO
DU
CT
W
ARR
AN TY
120223-1700