Staub Electronics ES-SUB-EVO6-100 EPISODE - EVOLUTION 6 IN POWERED SUBWOOFER (100 WATT) - Manual (Page 4)

Page 4
ES-SUB-EVO-6 Owner’s Manual
Center
Left
Right
Sub
Right
Rear
Right
Side
Left
Side
Left
Rear
II. Installation and Setup
3. Overview
Proper installation of the Episode® EVO Sub powered subwoofer requires these basic steps:
1. Place the subwoofer in the room. (Page 4)
2. Make connections to the system. (Pages 5 & 6)
3. Fine tune the subwoofer for the best sound quality and operation. (Page 7)
Review the options for each step and use the best method for the application. After installation is complete, test the
system thoroughly to ensure reliability and sustained sound quality. If the subwoofer will not function or perform as
expected, make sure that installation was completed correctly and check the Troubleshooting Steps before contacting
Episode® for assistance.
4. Placing the Subwoofer
Subwoofer placement can have an effect on the performance that you receive. All rooms are different, but the strongest
output will likely occur if the subwoofer is placed in a corner of the room on the same wall as the front channel speakers.
This is known as the boundary effect and will emphasize certain bass frequencies while canceling others. Some
listeners will find this to be the best sounding result, while others may find it “boomy” or muddy. Experiment with the
placement options available to you and use the tuning instructions that follow in the “Installation” section of this manual.