Staub Electronics B-100-HDMATRIX-4X4 BINARY - HDMI 4X4 MATRIX SWITCH WITH HDMI OUTPUTS - Manual (Page 15)

B-100 HDMATRIX Installation and Users Manual 4X4 & 8X8
© 2011 Binary
pg.15
4.3 EDID Status
Once EDIDs are configured, the assigned EDID for sources can be reviewed to ensure that
the desired output is configured or for troubleshooting.
Example: Input=3 Display Readout (Example)
EDID 5 Assigned
from Embedded
EDID Table
EDID Learned
from Output 4
1. Press STATUS -- --
2. Press INPUT -- --
3. Press Number Key (1-8)to select the desired Input -3 -3
4. Press ENTER 5
.
3
.
4
.
3
• If the second digit (the Input being queried) has a dot after it, then the first digit is
the EDID number from the Embedded EDID table.
• If the second digit (the Input being queried) does not have a dot after it, then the
first digit is the Output the EDID was learned from.