Staub Electronics D803-3D VIVITEK - 3D DIGITAL PROJECTOR (3600 LUMENS) - Manual (Page 37)

DLP Projector—User’s Manual
Advanced Feature
Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu.
Press ▲▼ to move to the Advanced menu and then press Enter or ►. Press ▲▼ to move up and
down in the Advanced menu. Press ◄► to change values for setting.
I TEM D ESCRIPTION
OSD Menu Setting
Press Enter / ► to enter the OSD setting menu. See page 30 for more information on OSD
Menu Setting.
Peripheral Test
Press Enter/ ► to enter the Peripheral Test menu. See page 30 for more information on
Peripheral Test.
Lamp Hour Reset
After replacing the lamp, this item should be reset. See page 31 for more information on Lamp
Hour Reset.
Low Power Mode Press ◄► to turn Low Power Mode on or off.
Fan Speed
Press the cursor ◄► button to toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humidity, or high
altitude (1500m/4921ft) areas.
– 29 –