Staub Electronics D803-3D VIVITEK - 3D DIGITAL PROJECTOR (3600 LUMENS) - Manual (Page 40)

DLP Projector—User’s Manual
3D
I TEM D ESCRIPTION
3D Press the cursor ◄► button to select different 3D mode.
3D Format Press the cursor ◄► button to enable or disable different 3D Format.
3D Sync Invert Press the cursor ◄► button to enable or disable 3D Sync Invert.
2Dto3D Press the cursor ◄► button to enable or disable different 2Dto3D mode.
2Dto3D Deep Press the cursor ◄► button to enable or disable different 2D to 3D Deep mode.
2Dto3D Curve Press the cursor ◄► button to enable or disable different 2D to 3D Curve mode.
Note:
1. The 3D OSD menu item is gray if there is no appropriate 3D source. This is the default setting.
2. When the projector is connected to an appropriate 3D source, the 3D OSD menu item is enabled for
selection.
3. Use 3D glasses to view a 3D image.
4. You need 3D content from a 3D DVD or 3D media file.
5. You need to enable the 3D source (some 3D DVD content may have a 3D on-off selection feature).
6. You need DLP link 3D or IR 3D shutter glasses. With IR 3D shutter glasses, you need to install a
driver on your PC and connect a USB emitter.
7. The 3D mode of the OSD needs to match the type of glasses (DLP link or IR 3D).
8. Power on the glasses. Glasses normally have a power on -off switch.
Each type of glasses has their own configuration instructions. Please follow the configuration instruc-
tions that come with your glasses to finish the setup process.
Note:
Since different types of glass (DLP link or IR shutter glass) have their own setting instructions,
Please follow the guide to finish the setup process.
— 32 —