Exit – Staub Electronics RL100 K40 - PORTABLE RADAR & LASER DETECTOR User Manual
Page 15
1
Voice Type
Female
Choose male or female voice for audio alerts.
2
Audible Voice
On
For all initial audio alerts: “Voice On” uses
voice; “Voice Off” uses tones only.
3
Test
On
Controls length of startup sequence after
powering on unit. “Test On” is standard 5-
second test. “Test Off” uses an abbreviated
sequence.
4
Speed Displayed
On
“Speed On” displays current speed in mph
when driving over 5 mph. “Speed Off”
turns off this display.
5
Compass Heading
On
Displays current compass heading when
driving over 5 mph.
6
POP Radar Band
Off
Enables the detection of POP radar, a very
short transmission signal that does not
transmit long enough to gather information
needed to issue a speeding ticket.
7
Quiet Ride
On
All audio alerts – except for “Marked to
Alert” locations – are automatically muted
when driving below a preset speed. Factory
setting is 25 MPH.
8
X-Band
On
Enables the detection of X-Band radar.
9
K-Band
On
Enables the detection of K-Band radar.
10
KA- Band
On
Enables the detection of KA-Band radar.
11
Laser
On
Enables the detection of laser.
12
Factory Reset
RESET! Returns the K40 to its original factory
defaults for all settings.
Default
Setting
Menu Options
(in order displayed)
Description
To save your settings and exit:
•
Press and hold MENU button for 3 seconds. (or do
nothing for 10 seconds)
•
The display will show
EXIT
and the voice will announce
“Exit”.
15